PC200-7 PC200LC-7 PC210-7 PC210LC-7 Main Hydraulic Pump For KOMATSU Excavator Parts 708-2L-00300 708-2L-01301 HPV95 Piston Pumps

• Part Name: Twin Variable Displacement Axial Piston Main Hydraulic Pump with Integrated Pilot Pump
• OEM Part Numbers:
  • Primary PN: 708-2L-00300
  • Alternate Interchange PN: 708-2L-01301
  • Internal Model: HPV95
• Compatible Excavator Models:
  Komatsu PC200-7, PC200LC-7, PC210-7, PC210LC-7 (20-ton medium excavator)
• Available Condition: Genuine Original New / Factory Remanufactured / Premium Aftermarket New
• Warranty: 12 months for genuine & reman pumps; 6–12 months for aftermarket units
• Net Weight: Approx. 148 kg
• Stock Status: In stock, ships within 3–7 working days

• Exact OEM HPV95 design, fully matched to SAA6D102E engine power curve of -7 series excavators
• Equipped with load sensing + constant horsepower dual control system, reducing fuel consumption and preventing engine stall under heavy loads
• Built-in pilot gear pump supplies stable control pressure for whole machine hydraulic circuits
• Direct bolt-on installation, identical mounting flange, port layout and spline shaft, no modification required
• High-strength cast iron housing with wear-resistant internal piston & cylinder block components for long-cycle heavy-duty digging
• Every unit undergoes full pressure, internal leakage and overall performance testing; ISO9001 & CE certified

• Pump Structure: Tandem variable axial piston pump assembly
• Single Side Displacement: 95 cm³/rev
• Rated System Pressure: 34.3 MPa (343 bar)
• Maximum Relief Pressure: 37.2 MPa (372 bar)
• Total Theoretical Flow: Approx. 428 L/min @ 2000 RPM
• Pilot Pump Output: 30 L/min, working pressure 3.9 MPa
• Rotation Direction: Counterclockwise (viewed from engine side)
• Drive Shaft: 16-tooth internal spline

• Direct Fit Models: Komatsu PC200-7, PC200LC-7, PC210-7, PC210LC-7
• Interchangeable Part Numbers: 708-2L-00300, 708-2L-01301, 708-2L-00460
• Extended Compatible: Partial fit for PC220-7 series with matching hydraulic modification

• Over 13 years specialized in hydraulic pumps for 20–22 ton Komatsu -7 series medium excavators
• Three quality grades optional: genuine original, factory remanufactured, cost-effective aftermarket replacement
• Strict pre-delivery QC inspection: pressure calibration, leakage detection and efficiency verification
• Adequate inventory stored in Guangzhou warehouse, flexible sea freight & air freight for global worldwide delivery
• Professional engineering team provides installation troubleshooting and long-term technical after-sales support
• Economical alternative solution vs expensive Komatsu genuine OEM spare parts

A: Yes, 708-2L-00300 / 708-2L-01301 is universal main pump assembly compatible with all four listed long carriage and standard chassis models.

A: They are upgraded interchange part numbers for the same HPV95 pump assembly, fully interchangeable for field replacement.

A: Products are in ready stock, dispatched within 3–7 working days after order confirmation; global sea & air shipping solutions are available.