KOMATSU PC200-8 PC200LC-8 PC210-8 PC210LC-8K Main Hydraulic Pump 708-2L-00400 708-2L-00500 708-2L-00490 for Excavator Parts

• Part Name: Twin Variable Displacement Axial Piston Main Pump with EPC Solenoid & Integrated Pilot Pump
• OEM Interchange Part Numbers:

  Primary PN: 708-2L-00400, 708-2L-00500, 708-2L-00490
  Internal Pump Model: HPV95

• Compatible Excavator Models:

  Komatsu PC200-8, PC200LC-8, PC210-8, PC210LC-8
  Note: PC210LC-8K uses dedicated pump part number 708-2L-00701, not interchangeable with this assembly

• Available Condition: Genuine Original New / Factory Remanufactured / Premium Aftermarket New
• Warranty: 12 months for genuine & reman units; 6–12 months for aftermarket pumps
• Net Weight: Approx. 150 kg
• Stock Status: In stock, ships within 3–7 working days

• Original Komatsu HPV95 electro-hydraulic design, perfectly matched to SAA6D107E-1 engine power curve for -8 series excavators
• Equipped with EPC proportional solenoid, load sensing + constant horsepower dual control system, reducing fuel consumption and preventing engine stall under heavy loads
• Built-in pilot gear pump supplies stable control pressure for entire machine hydraulic circuits
• Direct bolt-on replacement, identical mounting flange, port layout and 16-tooth internal spline shaft, no modification required
• High-strength cast iron housing with wear-resistant piston, cylinder block and valve plate for long-cycle heavy-duty digging & mining work
• Every pump undergoes full pressure calibration, internal leakage inspection and overall performance testing; ISO9001 & CE certified

• Pump Structure: Tandem variable axial piston pump assembly
• Single Side Displacement: 95 cm³/rev
• Rated System Pressure: 34.3 MPa (343 bar)
• Maximum Relief Pressure: 37.3 MPa (373 bar)
• Total Theoretical Flow: Approx. 425 L/min @ 2000 RPM
• Pilot Pump Output: 30 L/min, working pressure 3.9 MPa
• Rotation Direction: Counterclockwise (viewed from engine side)
• Drive Shaft: 16-tooth internal spline

• Direct Fit: Komatsu PC200-8, PC200LC-8, PC210-8, PC210LC-8
• Interchangeable Part Numbers: 708-2L-00400, 708-2L-00500, 708-2L-00490, 708-2L-00501
• Important Reminder: PC210LC-8K requires exclusive pump 708-2L-00701, cannot be replaced with this pump assembly

• Over 13 years specialized in hydraulic pumps for 20–22 ton Komatsu -8 series medium excavators
• Three quality grades optional: genuine original, factory remanufactured, cost-effective aftermarket replacement
• Strict pre-delivery QC inspection: pressure testing, leakage detection and efficiency verification
• Adequate inventory stored in Guangzhou warehouse, flexible sea freight & air freight for global worldwide delivery
• Professional engineering team provides installation troubleshooting and long-term technical after-sales support
• Economical alternative solution vs expensive Komatsu genuine OEM spare parts

A: Yes, these three part numbers are universal pump assemblies compatible with all four standard and long-undercarriage models above.

A: No. PC210LC-8K adopts dedicated hydraulic configuration with part number 708-2L-00701, structural and control differences prevent interchange.

A: They are upgraded superseded part numbers for the same HPV95 pump assembly, fully interchangeable for field replacement.

A: Products are in ready stock, dispatched within 3–7 working days after order confirmation; global sea & air shipping solutions available.