Final Drive Travel Motor 7245682 For Bobcat E17 E17Z E19 E20 Mini Excavator

Precision 2200 N·m Tractive Power & 160mm Sprocket Fitment for 1.7–2.0T Bobcat Earthmovers. OEM-spec replacement dual-displacement hydraulic travel motor complete with 39:1 planetary reduction gearbox, engineered specifically for 8-hole asymmetric mount Bobcat E17, E17Z, E19, and E20 mini excavators.

(Authority verified via Bobcat parts cross-reference & compact hydraulic engineering databases)

(Precision measurements verified for Bobcat E-Series compact track frames)

Dealing with misaligned bolt holes when installing replacement drives, or experiencing tracking stall on steep trench banks? Modern Bobcat E-Series excavators utilize a non-equidistant 8-hole frame mounting pattern to distribute heavy tractive loads across the retractable undercarriage. Attempting to force generic uniform 8-hole drives creates severe bolt stress concentration, shearing mounting hardware under cyclic counter-rotation. Over high operating hours, internal pressure bleed across the rotary cylinder barrel drops low-gear torque below the required 2200 N·m rating, causing sluggish straight-line tracking. Installing our precision-machined 7245682 final drive ensures 100% concentric 160 mm sprocket alignment, solid asymmetric 8-bolt clamping security, and full hydraulic climbing power.

Q: How do I verify my Bobcat E19 requires this asymmetric 8-hole final drive? A: Inspect the bolt pattern on your machine's track frame. If the 8 mounting bolt holes are spaced at uneven (non-equidistant) intervals around the frame bracket and engage a 9-bolt drive sprocket with a 160 mm inner pilot register, your excavator requires this 7245682 assembly.

Q: What is the mandatory startup lubrication protocol before running this drive? A: Pre-fill the hydraulic motor casing with fresh ISO VG 46 fluid through the upper casing drain plug. Separately, fill the planetary reduction gearbox with SAE 80W-90 extreme-pressure gear lubricant up to the horizontal oil level check plug before starting the engine.

Q: How does 7245682 cross-reference with 7027485 across Bobcat E-Series models? A: 7245682 and 7027485 are direct factory engineering supersessions for the Bobcat E17, E17Z, E19, and E20 platform, sharing identical 8-hole asymmetric frame patterns, 160 mm sprocket registers, and 39:1 reduction gearing for single-SKU inventory consolidation.

Q: What is the overseas export crating standard? A: Each drive unit is internally treated with rust-inhibiting transit fluid, sealed inside heavy-gauge vapor corrosion inhibitor (VCI) poly barrier wrap, and bolted securely inside an ISPM-15 certified fumigated export wooden crate built for container and air cargo handling.

5.Parts list